Back
to Refurbish Page
Sierra Army Depot
Tender with old body, pump
and hose reel at rear
Frame painted black, back of cab painted red
before body install,
PTO pump installation in progress
Passenger side compartments and wheel well
Driver side lower and upper compartments
and wheel well
Sierra Fire inspection team
Ken Burton, President, leads the pump
installation
Driver's side body installation
Passenger's side body installation, back and underside of
compartments painted for corrosion resistance
Wheel wells cut out, body squared prior to
bolting it to the body brackets
Tank carrier installation, tow eyes
installed
Suction side of plumbing installation in progress
 Aluminum diamond plate
installed Aluminum diamond plate installed
Modular frame fabricated with dunnage
compartment and cross lays mounted on top
Next two pictures:
Painted cab, body, and inside compartments
UPF Poly-Tank installed
Diamond plate installed, lights installed
Suction hose tray installed, roll-up door installation in progress
Plumbing installation in progress. 4 1/2" suction, 2 1/2" suction,
intake relief valve, discharge manifold, 2 1/2" discharge shown
circuit board installation
Inspecting the PTO, pump, pump panel
controls, and lights
Final Inspection: Front bumper extension,
LED warning lights,
lettering and striping, cross lay and dunnage, scene lights,
suction hose, ROM roll-up doors, new aluminum wheels, new tires
Final Inspection: Pump panel with labeled
easily-accessed controls and gauges
Front bumper extension with 1 1/2"
discharge
controlled at the pump panel
hose bed flaps, scene lights, folding
steps, hand rails,
rear direct tank fill, 10" rear water tank dump, tow eyes,
lettering and striping, red rotator, suction hose, ladder rack,
ROM roll-up doors
Completed 1,250 gallon water tender
|
